Keeping your swimming pool in the best condition is not as difficult as you may think. Besides, if you want to get the most value out of your pool, then you should do regular maintenance. So whenever you feel like taking a dip, you can use the pool immediately. So, to help you with that, I have a list of things you can do to keep your swimming pool in the best condition for as long as possible.
Patch and clean the liner
Many swimming pool owners tend to forget the condition of the liner. It may be tempting to ignore a tiny tear in the liner, but it could ruin or bite you later. It’d be best for you and everyone else who might use the swimming pool to fix any problem with the liner. Fortunately, you have plenty of options when it comes to swimming pool liners.
Fixing any problem with the liner is pretty easy. Get a pool patch kit, including the liner adhesive, and you are good to go. Besides, you can use this chance to spice up the liner of your pool.
Check for water circulation
Pool water circulation is a common problem for above-ground pools. It is obvious when you check around that there are dead spots in the pool where water circulation is poor. Usually, these spots are located behind ladders, under the skimmer, in any cracks and crevices, and around steps. A pump could help with this, but sometimes it doesn’t work for these dead spots. To alleviate this problem, you should keep a pool brush to manually circulate the water of your pool.
Shock the pool
This is one of the best things you can do to keep your pool clean and ready to use. Shocking is always encouraged and often needed to get rid of stubborn algae. You can get a granular oxidizer that often comes in a powdered form of chlorine. Simply sprinkle the powder in the pool and wait. If you use other chemicals as well, try to use them at different times.
While shocking is necessary, you don’t want to do it too much. Furthermore, it’s better to shock your pool at night, so the sun doesn’t dissolve the powder. Also, try to stay away from the pool the next day and keep the pump running all night.
Skim debris
It is unavoidable to see debris in your swimming pool, even if you have an indoor swimming pool. Debris is also the most common problem that swimming pool owners have to deal with it. If left unchecked, debris can contaminate the pool and cause even more problems in the future. Therefore, you should skim debris regularly, cleaning the pool’s surface.
There are various devices that can help you here, such as a long-handled net or a hand skimmer. Either of these two devices can easily remove debris, including bugs, leaves, trash, etc. Just clean the pool from debris for a few minutes every day, and your pool will look so much better.
Don’t forget about the pool heater
A pool heater can do a lot for your swimming pool. However, it needs as much maintenance as your pool. However, you should always consult the manual before you start the maintenance process to reduce the risk of damaging the pool heater. Remember that the purpose of cleaning the pool heater is to get rid of calcium scales that can accumulate inside.
You can always contact a professional to do it for you. Since the heater may need to be dismantled so the interior can be cleaned thoroughly, hiring a professional means you don’t have to deal with any of it. However, with more practice, you could do all this in no time.
Clean the pool filter
Another good idea you should do regularly is clean the pool filter. Not cleaning the pool filter could cause so much trouble in the future. However, it’s recommended that you don’t clean the filter more than the suggested amount. This is because leaving a small amount of debris or dirt could help the filter trap other unwanted particles.
Conclusion
As you can see, there are things you need to do to keep your pool in the best condition. Once you get used to doing all this, everything will be a breeze. The last thing to do is to enjoy your swimming pool.